Household Waste Carbonization Machine

Household Waste Carbonization Machine

Household waste carbonization machine adopts an advanced technology to achieve combustible gas recovery, purification and circulating combustion. That is to solve the problem of environmental pollution caused by the ordinary carbonizing machine produced in the carbonization engineering of smoke, and solves the problem of heat energy equipment required. It achieves a self-sufficient, and improves the continuity and economy.

Hot Models

  • Model: BST-03,BST-05,BST-12,BST-20,BST-30
  • Raw material: sawdust,coconut shell,wood,rice husk,sludge etc.
  • Capacity (kg/h):300,500,
    1200,2000,3000
  • Rotary speed: 3-9 turn/min
  • Power (Kw/h): 11,15,18.5,30,55
  • Structure: Horizontal
  • Host size((W*H* L):1000*1700*800mm~
    3000*3300*8500mm

Introduction:

Double-layer design make the lower part of the machine contact the hot air as much as possible, this design is helpful to raise the heat utilization efficiency from the beginning. The lower layer equipment utilize residue heat in carbonizing gas to flash steam the materials. This is the second stage to raise the utilization efficiency of heat. The optimized and concentration multi-pipe design of hot exhaust gas (generated from gasifier or hot blast heater) recycling pipe, carbonizing and fission heat collecting pipe, flash steaming steam collecting pipe, combustion emission collecting pipe can raise the heat utilization efficiency in the third time. After three time of optimized usage of heat, the temperature of the emission gas is below 100 centigrade. Under the inspection of related institutes, the heat use ratio of our equipment is over 85%.

Carbonizing Machine Was Installed in Malaysia
Carbonizing Machine Was Installed in Malaysia

Working Process Of Household Waste Carbonization:

1. Use the material reclaimer machine to collect the sticky sludge into the Measuring Conveyor;

2. The dispersion foggy device in the timber dryer pre- drying out the sludge and the sludge free fall inside the carbonization machine and been dry out for the second time;

3. Then the sludge fall in the outside bin of the machine and start the high temperature pyrolysis, sulfur emission, flue gas volatile, carbon focused carbide process;

4. The carbide will be discharged by the Water-cool conveyor, and the rest hot flue gas and heat will be suffered desulfurization process and smoke abatement process;

5. The smoke abatement and desulfurization steam will be cooled by the condenser and led to the recycle water pool.

Charcoal Machine Production Line In Vietnam
Charcoal Machine Production Line In Vietnam
Carbonization Host
Carbonization Host
Shredder
Shredder

Shredder
Crusher

Spray Tower
Spray Tower

De-dusting System
De-dusting System

Gasifier
Gasifier

Model BST-03 BST-05 BST-12 BST-20,30
Raw material Sawdust,coconut shell,wood, rice husk,
waste sludge and other biomass material
Structure Horizontal
Capacity (kg/h) 300 500 1200 2000,3000
Rotary speed of furnace 3-9 turn/ min 3-9
Power (Kw/h) 11 15 18.5 30,55
Host size (W*H* L)mm 1000*1700*800 1300*1900*8500 1600*2200*8500 2200*2800*8500,
3000*3300*8500
Rice Husk Carbon
Rice Husk Carbon
Coconut Shell Carbon
Coconut Shell Carbon

Sawdust Carbon
Sawdust Carbon

Sludge Carbon
Sludge Carbon

Carbon Bar
Carbon Bar

Carbon Briquettes
Carbon Briquettes

Application Of Charcoal

Daily Life: widely used as fuel in the barbecue, rinse and other food field.

Agriculture: attach heavy metal, improve the quality of soil.

Industry: can be reprocessed into activated carbon, widely used in the smelting, chemical fields.

Application of Bio-gas

Daily life: widely used as fuel;

Agriculture: greenhouse agriculture heating;

Industry: can be used as fuel;can be used for drying;can be used for generator to get electricity.

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.