Palm Shell Charcoal Machine

How to make palm shell charcoal? The answer is Beston palm shell charcoal machine. This machine not only can produce biomass charcoal from palm kernel shell, but can be also suitable for rice husk, saw dust, crop stalks, wood chips, bamboo, sludge etc. In a word,  palm kernel shell charcoal making machine can convert waste into wealth.

Hot Models

  • Raw material: sawdust,coconut shell,wood,rice husk,sludge etc.
  • Capacity (kg/h): 500/800-1000/1500-2000/2500-3000
  • Power (Kw/h): 40, 55, 60, 72
  • Host size((W*H* L): 30*15*7m/35*15*7m/45*15*10m/50*15*10m

Beston palm shell charcoal machine adopts the design of double layer and multi passage. It is mainly composed of drier, carbonizing host and other auxiliary equipment. Among these parts, there are other parts like driving, rack, drying, flash steaming, carbonizing, feeding, discharging, cooling, exhaust gas recycling, wet dust catcher, gasification furnace and related pipes. We can equip the machine with chasis if customer needs it (customer-made parts).

Carbonizing Machine Was Installed in Malaysia
Carbonizing Machine Was Installed in Malaysia

Double-layer design make the lower part of the machine contact the hot air as much as possible, this design is helpful to raise the heat utilization efficiency from the beginning. The lower layer equipment utilize residue heat in carbonizing gas to flash steam the materials. This is the second stage to raise the utilization efficiency of heat. The optimized and concentration multi-pipe design of hot exhaust gas (generated from gasifier or hot blast heater) recycling pipe, carbonizing and fission heat collecting pipe, flash steaming steam collecting pipe, combustion emission collecting pipe can raise the heat utilization efficiency in the third time. After three time of optimized usage of heat, the temperature of the emission gas is below 100 centigrade. Under the inspection of related institutes, the heat use ratio of carbonization equipment is over 85%.

Carbonization Host
Carbonization Host
Shredder
Shredder

Shredder
Crusher

Spray Tower
Spray Tower

De-dusting System
De-dusting System

Gasifier
Gasifier

ModelBST-05BST-10BST-20BST-30
Hourly Feeding Capacity500kg0.8-1 Ton1.5-2 Tons2.5-3 Tons
Working MethodContinuous
Raw Materials1. All kinds of biomass waste, such as sawdust, coconut shells, olive shells, palm shells, bamboo,etc.
2. Civil sludge, municipal sludge, industrial sludge,etc
3. MSW
Reactor SizeΦ800Φ1000Φ1300Φ1700
PatternHorizontal & Rotary
Heating MaterialsCharcoal, Wood, diesel, Natural Gas, LPG, Biomass, etc.
Total Power40kw/h55kw/h60kw/h72kw/h
Floor Area (L*W*H)30m*15m*7m35*15*7m45*15*10m50*15*10m
Operating PressureConstant Pressure
Cooling MethodRecycling Water Cooling
Life Span5-8 Years
Rice Husk Carbon
Rice Husk Carbon
Coconut Shell Carbon
Coconut Shell Carbon

Sawdust Carbon
Sawdust Carbon

Sludge Carbon
Sludge Carbon

Carbon Bar
Carbon Bar

Carbon Briquettes
Carbon Briquettes

Application Of Charcoal

Daily Life: widely used as fuel in the barbecue, rinse and other food field.

Agriculture: attach heavy metal, improve the quality of soil.

Industry: can be reprocessed into activated carbon, widely used in the smelting, chemical fields.

Application of Bio-gas

Daily life: widely used as fuel;

Agriculture: greenhouse agriculture heating;

Industry: can be used as fuel;can be used for drying;can be used for generator to get electricity.

Product certification picture_01Product certification pictures_02

The upper part of charcoal manufacturing machine adopts edge driving and center screening double drive and step-less speed change structure. The structure can compulsorily change the materials into fine powder in the flash steaming and drying chamber, so the materials can fully contact the hot air, and the controllable rotating speed enable us to control the contacting time of materials and hot air. Then we can get material with the same humidity although their initial humidity is different. After drying, the material will automatically flow into the carbonization machine in the lower part. The upper part of Beston charcoal equipment is for drying material and the lower part is for carbonizing the material.

Biomass Gasifier
Biomass Gasifier

Usually, we use one equipment to supply hot air (it can be hot blast stove, the fuel can be coal, branch, biomass pellet, coal gas or other combustible gas; it can also be biomass gasifier, burner and coal spray machine etc.), on one hand, we dry raw materials by using hot exhaust gas and hot air from carbonizing chamber; on the other hand, we use hot air carbonize raw material directly. For undeveloped area, we can use simple single-layer carbonization machine to process materials with the humidity less than 10% so we can save some investment.

    Please feel free to give your inquiry in the form below.

    Industry (required):

    Your Name (required):

    Your E-mail (required):

    Your Phone (required):

    Your Country (required):

    Your Company (required):

    Your Message (required):